MARINE APPLICATION SPEAKERS
Excessive moisture, corrosive salt spray, harsh UV rays and general temperature fluctuations all call for an extreme speaker; a custom install speaker designed expressed for environments where excessive moisture is an issue.
Quick Specs
- Santoprene Thermoplastic Elastomer surrounds
- E-Coated Corrosion-resistant chassis and clamps
- Conformal Coating on PCB’s and Crossover
- Stainless-steel Micro-Perf Grille
- Weather-resistant rubber ring with grommets secures grille to speaker
- Stainless Steel Screws and springs
Paradigm CI Pro Series P65-RX - each
CI Pro P65-RX Specifications
Design
2-driver, 2-way in-ceiling, SHOCK-MOUNT™ Isolation Mounting System, nylon-blended rigid baffle
Crossover
2nd-order electro-acoustic at 2.5 kHz
Frequency Response On-Axis
±3 dB from 75 Hz - 22 kHz
Frequency Response 30° Off-Axis
±3 dB from 75 Hz - 18 kHz
High Frequency Driver
1" (2.5cm) X-PAL™ dome, ferro-fluid damped / cooled, Reduced Edge Diffraction (RED™) Technology, Perforated Phase-Aligning (PPA™) Tweeter Lens
Mid/Bass Frequency Driver
6.5" (16.5cm) mineral-filled polypropylene cone, overmolded Active Ridge Technology (ART™) surround, die-cast aluminum chassis
Low Frequency Extension
41 Hz
Sensitivity Room / Anechoic
91.5 dB / 87.5 dB
Impedance
Compatible with 8 ohms
Suitable Amplifier Power Range
15-100 W
Maximum Input Power
80 W
Finishes
White, paintable grille, black/grey speaker
Weight
5.7 lbs. (2.6 kg)
Overall Dimensions
8.875" (22.5cm) Diameter
4.25" (10.8cm) DepthCut-Out Dimensions
7.75" (19.7cm) Diameter
Minimum Mounting Depth
Depth required is the distance
between 1/2" drywall, or similar material.4" (10.2cm)
Specifications are subject to change without notice